UL508A and NFPA79 Kits
The SIRCO M and MV are manually operated modulable and modular multiploar load break switches from 16 to 160 A.
On and off load switches providing safety isolation for any low voltage circuit, particulary for machine control circuits.
The new changes in UL508A the Standard for Industrial Controls Panel and Industrial Machinery will impact the design of the equipment for the North American market. The changes effective Marc 1, 2007 concern the disconnect means and the interlocking of the enclosure door of a panel. Socomec exclusive solutions provide full compliance with new requirements of UL508A and NFPA 79.
SIRCOVER M switches is composed of two 3 pole SIRCO M switches and conversion kit.
SIRCOVER M are manually operated multipolar changeover switches. They ensure switching, transfer of sources or transfer of two low voltage circuits on load as well as their safety disconnection

Flywheel VSS+ DC
Flywheel VSS+DC
Associated with DELPHYS MP and DELPHYS MX UPS, it overcomes the constraints involved in the storage of energy by chemical batteries.
Used instead of batteries and connected to a direct current bus, a flywheel rotating at a very high speed supplies energy to a UPS when the electrical grid is down.
The VSS+ DC system is highly reliable, compact and light. It is not subject to any temperature constraints and it can be backed up within 2 minutes.

SHARYS IP modular power station

Your solution for supplying DC loads in a heavy environment. From 15 to 200 A.
SHARYS IP System
  
Even greater accuracy (IEC 62053-21 class 0.5S), easy fitting (test function, bad connections corrected without modifying cabling), readability (backlit high luminosity LCD display, configurable) and upgradeability (optional modules so you can add new functions at any time).
DIRIS A

DELPHYS MP
60 to 200 kVA UPS to protect your Data Centres, suitable for the new IT loads with a high power factor.
The elite DELPHYS MP rectifier draws a sinusoidal current so there is no need for an oversized upstream supply network.
UNI VISION
Download the new version of UNI VISION software for individual workstation UPS management.

Atys M are new modular automatic changeover switches dedicated to apllications from 63 to 160 A. Based on two mechanically interlocked switches, they offer an innovative compact changeover solution.

 ATYS  
A new range for greater performance and adaptability: compact (2.5 modules or 48 x 48 x 90mm flush-mounted), TRMS measurement principle (RMS value), fully configurable with bar graph, the new RESYS range is suitable for all differential protection applications.

ISOM® ALD590 monitoring unit

For the permanent insulation monitoring of highly disturbed industrial or tertiary installations in insulated neutral load (IT).
ISOM ALD590
  
This is a software programme that allows you to rate your busbar supports. It determines the cross section of the bars and the distance between the SOCOMEC supports adapted to the electrical characteristics of your panel.
MECHANICAL SYSTEMS